Brayt Hologram remover 250g

Brayt micro-scratch and hologram remover.

Removes even the finest scratches and holograms from paint surfaces, especially recommended for dark surfaces.

1. Application by hand or machine, not in direct sunlight.
2. Apply to a clean and dry surface. Polish the paint surface first with Brayt T1/T2 agents.
3. When polishing by hand, use a microfibre cloth and a fast, continuous movement with steady pressure .
4. Using a polishing machine, run the product onto the surface first with lower (600-800) revolutions, gradually increase the revolutions up to 2000 until the substance is almost completely worn out.
5. Wipe off excess with a clean microfiber cloth
6. After polishing Finish the surface with wax or Brayt T4 coating.