1000 ml = 37.50 €
What is Mipa 1K-Primer N 75 primer spray?
Mipa 1K-Primer N 75 is a fast-drying, one-component primer for small repair jobs. Its high filling power helps level minor surface imperfections before topcoating. The primer provides excellent adhesion and is easy to sand.
The product is suitable for iron, steel and many paintable automotive plastics, including POM, PU, ABS, PVC, PC, PS, PA and PP/EPDM.
Features
- Colour: grey
- Ready-to-use 1K primer
- High filling power and easy sanding
- Overcoatable with common water-based and solvent-based 1K and 2K topcoats
- Overcoatable after approximately 20–30 minutes at 20 °C
- Sandable after approximately 30 minutes at 20 °C
- Pack size: 400 ml
Before painting
Remove rust, grease and loose paint. Sand and clean the substrate thoroughly. The surface must be clean and dry.
Application
Shake the can vigorously for 1–2 minutes and perform a test spray. Apply 2–3 coats from a distance of approximately 20–30 cm. Allow a flash-off time of 3–5 minutes between coats. After use, turn the can upside down and spray until the valve is clean.
Drying times at 20 °C
- Dust dry after approximately 5–10 minutes
- Touch dry after approximately 10–15 minutes
- Overcoatable after approximately 20–30 minutes
- Sandable after approximately 30 minutes, or alternatively after drying for 15 minutes at 60 °C
Sanding grits before topcoating
Dry sanding:
- For single-stage topcoat systems: P400
- For two-stage topcoat systems: P500–P600
Wet sanding:
- For single-stage topcoat systems: P600
- For two-stage topcoat systems: P800–P1000