APP C610 Super Glue – For Plastic, Rubber and Metal
In stock
What is APP C610 Super Glue?
APP C610 Super Glue is a fast-curing, medium-viscosity cyanoacrylate adhesive specially designed for bonding plastic, rubber and metal. It forms a strong, neat and almost invisible bond in just a few seconds.
This solvent-free super glue bonds to both smooth and porous materials. It is ideal for repairing car interior components, plastic parts, rubber seals and other small components.
The adhesive is resistant to moisture, ageing and temperature fluctuations. Thanks to its medium-viscosity consistency, it is easy to apply precisely, making even small bonding tasks quick and neat.
What can APP C610 Super Glue be used for?
APP C610 is suitable for a wide range of repair and bonding applications.
- Bonding car interior components and small plastic parts
- Repairing rubber seals and other rubber components
- Bonding metal and plastic parts together
- Bonding leather and fabric materials
- Bonding wood, plywood, cork and laminates
- Bonding ceramics, paper and cardboard
The adhesive is suitable for both smooth and porous surfaces. However, adhesion may vary depending on the type of plastic, so we recommend performing a test bond before use.
Features and specifications
- Product: Fast-curing super glue
- Composition: Ethyl cyanoacrylate
- Colour: Clear, colourless
- Viscosity: Medium viscosity, 70–90 mPa·s (25 °C)
- Curing time: From a few seconds to approximately 40 seconds, depending on the material
- Full bond strength: After 24 hours
- Temperature resistance: −40 °C to +85 °C when fully cured
- Properties: Moisture-resistant and solvent-free
- Adhesion: Smooth and porous surfaces
- Package size: 20 ml
How to use APP C610 Super Glue
-
Clean the surfaces. Make sure the surfaces to be bonded are dry, clean and free from grease. Also remove any old adhesive, paint and sealant residues.
-
Prepare the adhesive. Allow the unopened adhesive bottle to reach room temperature before use.
-
Apply the adhesive. Apply a small amount of adhesive in drops to one of the surfaces to be bonded.
-
Join the parts. Immediately press the surfaces together and hold them in place until the adhesive begins to cure.
-
Allow to cure. The adhesive usually bonds within a few seconds. Full bond strength is achieved after approximately 24 hours.
Note! The adhesive cures through exposure to moisture in the air. The recommended relative humidity during curing is 40–70%. Avoid contact with skin and eyes, and always follow the instructions on the packaging and in the safety data sheet. This product is intended for professional use.
